Waterproof Cable Gland In Chrome Plated Brass - For Marine Cables - Thru Deck Fitting

Product Description

Waterproof cable gland, in a choice of sizes.  Made from chrome-plated brass, these cable glands are suitable for marine use.  Use our cable gland fittings for a sealed outlet for electrical cables that must pass from the outside to the inside of your boat.

Cable glands are ideal for navigation equipment, lights, depth sounders, fish finders, autohelms etc.

The waterproof cable gland comes with a tapered grommet which seals against the cable and fitting as it is tightened.  Secure the gland housing to the deck or using the 3 countersunk screw holes provided.  Also be sure to apply sealant between the flange and the deck.  Don't use these cable glands for submerged areas of your boat.

Attach the gland housing either with our 3.5mm self-tapping stainless screws, or with our M3 or M4 set-screws - refer to the hole size when selecting set-screw size.  Also, if using set-screws for attachment, you can find corresponding nuts and washers in our fixings section.

Use these waterproof cable glands when the cable is going to be fitted once as a permanent route (though they may easily be dismantled for maintenance).  Alternatively, if you need to connect and disconnect your electrical equipment regularly, take a look at our waterproof plugs instead.

• Chrome-plated brass construction
• Choice of 3 sizes
• Suitable for marine use
• Tapered rubber grommet seals onto the cable