Flush Lifting Ring / Flush Door Pull - 316 Stainless Steel - Rectuangular Base With Circular Lift Ring

Product Description

Flush lifting ring, or flush door pull,  made from solid 316-grade stainless steel.  Fit this flush lifting ring into boat floor boards or locker doors for a streamlined and functional appearance.  The overall shape of the lifting ring fitting is rectangular, with a circular pull-out ring.

We also have a round lifting ring if your prefer.  The fixing holes are 5.2mm diameter, so are suited to our 4.8mm stainless steel self-tapping screws.

Being made from 316-grade stainless steel these lifting rings are quite happy outside even in salt-water conditions.  Our flush door pulls are also suitable for kitchen cabinet doors, giving a sleek and streamlined look.

Fitting of these flush lifting rings needs a recess in the door or board.  The main rectangular plate parts is approximately 4mm thick, so a recess will need making (by routing or chiselling) to suit.  Also a deeper recess (12.5mm) will be needed under the hinged area.  Consequently, we would recommend these for fitting in wood 18mm thick or more.

These flush lifting rings have a lovely polished finish, and a solid quality feel, making them ideal for both interior and exterior marine use, including external cockpit lockers and hatches. 

• 316-Grade stainless steel
• Solid and quality feel
• Polished finish
• Suitable for exterior as well as interior
• Suitable for use as kitchen door pulls
• Recommended for doors 18mm thick or more
• Use our 4.8mm self-tapping screws