- Bespoke Stainless Fabrications
- Wire Rope Builder
- On Sale: Up To 50% Off
- Consumables
- Sacrificial Anodes
- Cabin Hardware
- Stainless Steel Tube & Tube Fittings
- Bilge Pumps & Water Management
- Hose & Pipe Fittings & Engine Room
- Rope & Lines
- Deck Fittings
- Anchors
- Pulley Blocks & Sail Handling
- Custom-Made Pulley Systems
- Kits & Kit Boxes
- Fixings & Fastenings
- Rigging, Cable & Rope Fittings
- Shackles & Swivels
- Canopy Fittings
- Sailing Tools & Implements
- Electrical Fittings
- Steering & Rudder Fittings
-
Office: Unit D, Aerial Business Park,
Lambourn Woodlands, Hungerford RG17 7RZ - 01959 546476
- info@boatfittings.co.uk
- Mon - Fri / 8:30 AM - 6:00 PM
*UK mainland only
INTERNATIONAL SHIPPING
ALSO AVAILABLE
Huge range of A4/316 marine stainless boat fixtures
and fittings, all fully-dimensioned for your selection
- Home
- Rigging, Cable & Rope Fittings
- Swage Fittings & Wire Rope
- Wire Rope End Terminal Fork End, 316 Stainless Steel Wire Rope Terminal With Mechanical Grip Connection
See our new Stainless Steel Wire Rope Builder tool. Click here for details
Wire Rope End Terminal Fork End, 316 Stainless Steel Wire Rope Terminal With Mechanical Grip Connection
Prices from £34.36 - £307.01
In stock
SKU
Categories Swage Fittings & Wire Rope , Rigging, Cable & Rope Fittings
Product Description
Wire rope end fork terminal for mechanical assembly without specialist tools, made from 316 stainless steel. These marine-grade stainless fork terminals for wire rope are available to suit wire rope diameters of 4mm, 5mm, 6mm and 8mm.
The main advantage of these ‘DIY’ wire rope terminals is that they can be used in situations where the stainless steel wire rope needs to be passed through holes – eg for boat stanchion posts to make a guard rail, before the wire rope end terminal is fitted. The other advantage of these fittings, which are secured to the wire rope mechanically, is that in some cases it is difficult to measure the exact length needed for your wire rope assembly until you are in the process of assembly.
These stainless steel wire rope fork terminals incorporate a tapered mechanical wedge grip mechanism, which is applied by use of spanners, and therefore does not need the use of specialist equipment.
- Can be assembled and tightened with spanners
- Made From 316 Stainless Steel
- Great for boat stanchion rails (pass through the stations before tightening)
- Can be assembled without special equipment
- Sizes to suit a range of wire rope diameters
- Tapered wedge-grip action
Related Products
-
Stainless Steel Wire Rope, 316-Grade 1x19 For Marine & Rigging, Shrouds, Stays, Guard Rails, Polished Finish
Stainless steel wire rope, 316-grade stainless, 1x19 construction. This wire...
Prices from£2.89 - £153.47 -
Stainless Wire Rope 316 Marine Grade 7x19 Construction, Cut To Length
Stainless steel wire rope 7x19 construction manufactured from 316 stainless...
Prices from£1.16 - £45.78 -
Wire Rope End Terminal Eye End, 316 Stainless Steel Wire Rope Terminal With Mechanical Grip Connection
DIY mechanical grip connection assembled and tightened with spanners.
Prices from£30.30 - £271.00
All Prices Include VAT