- Bespoke Stainless Fabrications
- Wire Rope Builder
- On Sale: Up To 50% Off
- Consumables
- Sacrificial Anodes
- Cabin Hardware
- Stainless Steel Tube & Tube Fittings
- Bilge Pumps & Water Management
- Hose & Pipe Fittings & Engine Room
- Rope & Lines
- Deck Fittings
- Anchors
- Pulley Blocks & Sail Handling
- Custom-Made Pulley Systems
- Kits & Kit Boxes
- Fixings & Fastenings
- Rigging, Cable & Rope Fittings
- Shackles & Swivels
- Canopy Fittings
- Sailing Tools & Implements
- Electrical Fittings
- Steering & Rudder Fittings
-
Office: Unit D, Aerial Business Park,
Lambourn Woodlands, Hungerford RG17 7RZ - 01959 546476
- info@boatfittings.co.uk
- Mon - Fri / 8:30 AM - 6:00 PM
*UK mainland only
INTERNATIONAL SHIPPING
ALSO AVAILABLE
Huge range of A4/316 marine stainless boat fixtures
and fittings, all fully-dimensioned for your selection
- Home
- Fixings & Fastenings
- Rivets & Inserts
- 316 Stainless Steel Rivnuts (Countersunk), Metric Threaded Nuts For Permanent Riveting in Place
See our new Stainless Steel Wire Rope Builder tool. Click here for details
316 Stainless Steel Rivnuts (Countersunk), Metric Threaded Nuts For Permanent Riveting in Place
Prices from £5.51 - £63.61
In stock
SKU
Categories Rivets & Inserts , Fixings & Fastenings
Product Description
Stainless steel rivnuts (rivet-nuts) are a way to provide a permanently fixed nut, and are especially useful where you do not have access to the back side of a tube or bulkhead – the rivnut can be fitted entirely from the outside, using a special rivet setting tool. We have two styles of stainless steel rivnuts, these ones have a countersunk head, the other ones that we have are made with a flanged head.
Our rivnuts have a standard metric thread (a range of rivnut sizes are available), and they are made from solid 316-grade stainless steel so suitable for marine and salt-water exposure. Rivnuts are installed using a rivnut application tool, there are manual versions of the rivnut setting tool available which are not too costly, there are also adaptors for electric drill/drivers for installing rivnuts.
Each rivnut, depending on its size, has a recommended installation hole size, and grip range (the thickness of material that it is best suited to). If you want to install a rivnut into a thickness of material which is greater than the recommended grip range, you might want to locally thin (by counter-sinking or similar) to achieve the recommended grip thickness.
- 316 Stainless Steel
- Standard Metric Thread
- For Permanent Installation Of Nut (riveted in place)
- Countersunk head
Related Products
-
316 Stainless Steel Pop Rivet In A4 Stainless Steel Rivet For Marine / Sailing Boat Blind Fixings
Stainless Steel dome blind pop rivets for fastening sheet metal, plastic,...
Prices from£0.80 - £38.77 -
316 Stainless Steel Rivnuts (Flanged), Metric Threaded Nuts For Permanent Riveting in Place
Rivnuts cater for those situations where you want to fit a nut inside a...
Prices from£5.51 - £69.76
All Prices Include VAT