- Bespoke Stainless Fabrications
- Wire Rope Builder
- On Sale: Up To 50% Off
- Consumables
- Sacrificial Anodes
- Cabin Hardware
- Stainless Steel Tube & Tube Fittings
- Bilge Pumps & Water Management
- Hose & Pipe Fittings & Engine Room
- Rope & Lines
- Deck Fittings
- Anchors
- Pulley Blocks & Sail Handling
- Custom-Made Pulley Systems
- Kits & Kit Boxes
- Fixings & Fastenings
- Rigging, Cable & Rope Fittings
- Shackles & Swivels
- Canopy Fittings
- Sailing Tools & Implements
- Electrical Fittings
- Steering & Rudder Fittings
-
Office: Unit D, Aerial Business Park,
Lambourn Woodlands, Hungerford RG17 7RZ - 01959 546476
- info@boatfittings.co.uk
- Mon - Fri / 8:30 AM - 6:00 PM
*UK mainland only
INTERNATIONAL SHIPPING
ALSO AVAILABLE
Huge range of A4/316 marine stainless boat fixtures
and fittings, all fully-dimensioned for your selection
- Home
- Bilge Pumps & Water Management
- Electric Manual Bilge Pumps
- Self-Priming Bilge Pump, 12V Water Pump With Self Priming Action Up to 1.2m, 8 Gallons Per Minute.
See our new Stainless Steel Wire Rope Builder tool. Click here for details
Self-Priming Bilge Pump, 12V Water Pump With Self Priming Action Up to 1.2m, 8 Gallons Per Minute.
Price £152.92
In stock
SKUSM-1503
Categories Electric Manual Bilge Pumps , Bilge Pumps & Water Management , Electrical Fittings
Product Description
Introducing the SEAFLO self-priming bilge pump, a tough, reliable, impeller driven pump for the extraction of bilge water in locations that traditional bilge pumps cannot get to. This pump is best mounted at a higher level in or above the bilge (dry location) with its suction tube directed to a low point where water accumulates.
This 12 Volt pump is designed to deliver a powerful flow of 8 gallons per minute, ensuring efficient water removal from your boat's bilge. With its self-priming capabilities, it quickly eliminates the need for manual priming, saving you time and effort. The thermally protected motor guarantees safe operation, preventing overheating and extending the pump's lifespan. With a maximum lift of 3 meters, it can handle even demanding pumping tasks.
It is recommended to fit a strainer at the inlet end of the system to prevent large debris from going through the pump.
Trust SEAFLO for reliable performance and peace of mind on the water.
- 12 Volts
- 4 Year warranty
- 30 LPM/8.0 gallons minute flow rate
- 1/2inch FNPT (1/2” BSP) female thread for attaching inlet and outlet fittings
- Self priming
- Thermally protected motor
- Self-priming capability – 1.2m
- 80mm rubber/copper impeller
- Current draw 8A
- Fuse rating 10A
- Maximum lift (head) 3m
- 18 AWG x 1m
- Weight 2.48Kg
Related Products
-
Clear Braid-Reinforced PVC Hose / Tube For Water and Air Delivery
Braid reinforced PVC hose, sold by the metre. Constructed from a 100% PVC...
Prices from£2.32 - £73.21 -
Jubilee Clips / Hose Clips
316 (A4) Marine Grade stainless Stainless Steel Jubilee Clips. Perfect for...
Prices from£2.47 - £26.74 -
Stainless Steel Pipe Fitting With External Thread (BSP)
Stainless steel pipe fitting with external thread. BSP threaded marine-grade...
Prices from£5.35 - £34.30
All Prices Include VAT