{"title":"Brackets \/ Mounts \/ Holders","description":"\u003cp\u003eA wide-ranging collection of deck brackets, mounts and holders in polished 316 and A2\/A4-grade stainless steel, covering the hardware needed to mount and secure equipment across the boat. The range includes fender hooks and fender eyes for attaching fenders alongside; oarlock and rowlock sockets in side-mount and top-mount configurations; deck hinges for spray hood and canopy tube connections; flag poles and recessed flag pole deck sockets; pad eye hoops in round, square and diamond base styles; U-bolts with load plates; threaded bulkhead mount brackets; and a variety general-purpose mounting hardware for deck and cabin installations.\u003c\/p\u003e","products":[{"product_id":"flush-fitting-fishing-rod-holder","title":"Fishing Rod Holder For Boats - Flush Fitting - 316 Stainless Steel - Includes Rubber Cap","description":"\u003cp\u003eFishing rod holder for boats, flush fitting, with an angle of approximately 60-degrees between the mounting surface and the line of the tube.  This rod holder is designed to be fitted 'flush' with the surface of your boat.  Usually these fishing rod holders are fitted in the fibreglass surrounding the cockpit of your boat.\u003c\/p\u003e\n\u003cp\u003eThe inner diameter of the rod holder tube is 40mm.  Use the rubber cap, supplied, to close off the top of the rod holder when not in use, to stop rain-water getting in.\u003c\/p\u003e\n\u003ch4\u003eFishing Rod Holder Fitting Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eFirst take some time to find the perfect place to fit your rod holder.  The ideal place should be on a relatively flat surface (without much curvature), and should be chosen to point your fishing rod in a good direction for you.  Also it is very important to make sure there is plenty of room for the tube part of the rod holder, beneath the mounting surface.\u003c\/li\u003e\n\u003cli\u003eCarefully mark the centre point where you will be making the large hole needed for the tube to fit through.  At this point, double check that there is enough space for the mounting flange to fully contact the fibreglass.  Also check that there is plenty of space for the 3 fixing holes, and suitable access if you plan to use a nut and bolted method.\u003c\/li\u003e\n\u003cli\u003eUse masking tape on the surface to be drilled, then mark the centre point\u003c\/li\u003e\n\u003cli\u003eDrill a small pilot hole at the centre point\u003c\/li\u003e\n\u003cli\u003eUse a suitably sized hole saw to cut the centre hole, you may have to slightly elongate the hole with a file or rotary tool to account for the angle of the tube.\u003c\/li\u003e\n\u003cli\u003ePut the rod holder into position, and check its alignment.  Then mark through the 3 fixing hole places, to determine the positions where you will need to drill through the fibreglass for your fixings.  Before drilling your fixing holes, carefully check the correct diameter depending on whether you are using \u003ca title=\"stainless steel self-tapping screws\" href=\"\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\"\u003eself-tapping screws\u003c\/a\u003e or \u003ca title=\"stainless steel set-screws\" href=\"\/products\/stainless-steel-countersunk-socket-set-screws\"\u003eset-screws\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTest the fit of the rod holder and fixings.  Once you are completely happy with the fit, do the final assembly with some silicone sealant underneath the rubber gasket, between the gasket and the rod-holder, and under the heads of the fixings.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFishing Rod Holder For Boats - Key Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlush fitting design\u003c\/li\u003e\n\u003cli\u003eFor rod diameters up to 40mm\u003c\/li\u003e\n\u003cli\u003eIncludes rubber cap to prevent water ingress\u003c\/li\u003e\n\u003cli\u003e60-degree angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357139968074,"sku":"SM-0234","price":25.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-0234-A.jpg?v=1717507039"},{"product_id":"outboard-motor-mounting-bracket-with-wooden-plate","title":"Outboard Motor Mounting Bracket With Wooden Plate","description":"\u003cp\u003eOutboard motor bracket with marine-ply plate. Suitable for outboard motors weighing up to 30kg. Spring action to easily allow movement between the raised and lowered position.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless steel construction\u003c\/li\u003e\n\u003cli\u003eStrong Marine Ply Plate\u003c\/li\u003e\n\u003cli\u003eFor Outboard Motors Up To 30kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357200064586,"sku":"SM-0365","price":128.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0365-a.jpg?v=1717508336"},{"product_id":"water-ski-rope-hook-63mm-outside-diameter","title":"Water-Ski Rope Hook, 63mm Outside Diameter, Stainless Steel","description":"\u003cp\u003e63mm diameter water skiing rope hook, manufactured in 316 Stainless Steel  marine grade stainless steel.  Formed from a single piece of stainless steel, and with a polished finish this mounting hook is ideal for attaching water-ski ropes to the back of your speedboat. The water-skiing rope mounting bracket includes large diameter washers and fixings nuts.  Its construction is very sturdy, being manufactured from a single piece of A4 316 stainless steel.  \u003c\/p\u003e\n\u003cp\u003eThe hook shape is designed for ease of use while providing a secure mounting for the ski rope. We have two sizes of ski rope mountings, please review the dimension information included in the alternative images of this item.  The larger size of ski rope mount can be found here. When installing this ski rope mount hook please check clearance and access for the mounting studs, and also assess the strength \/ thickness of the transom in the area you intend to mount.  We would recommend the use of a good quality silicone sealant beneath the flanged parts of the mounting bracket for a water-tight seal.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357212057674,"sku":"SM-0416","price":39.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-0416-A.jpg?v=1717508592"},{"product_id":"water-ski-mount-hook-90mm-outside-diameter","title":"Water-Ski Mount Hook, 90mm Outside Diameter, Stainless Steel","description":"\u003cp\u003e90mm diameter water ski mount hook, manufactured in 316 Stainless Steel: Large Size Water ski mount hook.  Formed from a single piece of stainless steel, and with a polished finish this mounting hook is ideal for attaching water-ski ropes to the back of your speedboat. The water-skiing rope mounting bracket includes large diameter washers and fixings nuts.\u003c\/p\u003e\n\u003cp\u003eIts construction is very sturdy, being manufactured from a single piece of A4 316 stainless steel.  The hook shape is designed for ease of use while providing a secure mounting for the ski rope. We have two sizes of ski rope mountings, please review the dimension information included in the alternative images of this item. The standard size of ski rope mount can be found here.\u003c\/p\u003e\n\u003cp\u003eWhen installing this ski rope mount hook please check clearance and access for the mounting studs, and also assess the strength \/ thickness of the transom in the area you intend to mount.  We would recommend the use of a good quality silicone sealant beneath the flanged parts of the mounting bracket for a water-tight seal.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357222772810,"sku":"SM-0417","price":53.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-0417-A.jpg?v=1717508828"},{"product_id":"oarlock-rowlock-dinghy-oar-support-in-stainless-steel-pair","title":"Oarlock \/ Rowlock, Dinghy Oar Support, In Stainless Steel","description":"\u003cp\u003eOarlock \/ Rowlock, Dinghy Oar Socket, In Stainless Steel, 12.5mm or half inch diameter spigot, with hole for safety line to prevent accidental loss.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Stainless steel construction\u003c\/li\u003e\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\u003cli\u003eSafety line attachment hole\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357291159626,"sku":"SM-0482","price":29.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0482-1.jpg?v=1717510286"},{"product_id":"oarlock-rowlock-socket-in-stainless-steel-pair","title":"Oarlock \/ Rowlock Socket, In Stainless Steel","description":"\u003cp\u003eOarlock \/ Rowlock Socket, In marine grade Stainless Steel ensuring corrosion resistance. This fitting is designed for a secure and efficient oar mounting on boats. Featuring a12.6mm or half inch diameter thru-hole. This socket ensures a smooth oar rotation and minimal wear, ideal for rowing boats, tenders and small craft.\u003c\/p\u003e\n\u003cp\u003eWorks with our open oarlock SM-0482.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Stainless steel construction\u003c\/li\u003e\n\u003cli\u003e12.6mm thru-hole\u003c\/li\u003e\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357302202442,"sku":"SM-0483","price":28.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0483-1.jpg?v=1717510546"},{"product_id":"oarlock-rowlock-socket-in-stainless-steel-top-mounted-pair","title":"Oarlock \/ Rowlock Socket, In Stainless Steel, Top Mounted","description":"\u003cp\u003eOarlock \/ Rowlock Socket, in marine grade Stainless Steel to ensure corrosion resistance. This fitting has a 12.6mm or half inch diameter thru-hole. The socket ensures a smooth oar rotation. This version is mounted from the top, we also have other styles available.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Stainless steel construction\u003c\/li\u003e\n\u003cli\u003e12.6mm thru-hole\u003c\/li\u003e\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357331497034,"sku":"SM-0484","price":24.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0484-1.jpg?v=1717511321"},{"product_id":"stainless-steel-flag-pole-boat-flag-pole-316-stainless","title":"Stainless Steel Flag Pole, Boat Flag-Pole, 316 Stainless","description":"\u003cp\u003eStainless steel flag pole. 620mm in length, and 25mm in diameter at the base.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Stainless steel construction\u003c\/li\u003e\n\u003cli\u003e25mm base diameter\u003c\/li\u003e\n\u003cli\u003eRecessed design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357340442698,"sku":"SM-0540","price":35.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0540-1.jpg?v=1717511569"},{"product_id":"outboard-motor-bracket-sprung-action-for-up-to-40kg-weight","title":"Outboard Motor Bracket, Sprung Action For Up to 40kg Weight","description":"\u003cp\u003eOutboard motor bracket for attachment to transom with sprung action. This outboard motor bracket is constructed from 304 stainless steel and has a sturdy sprung action to assist in lifting the outboard out of the water.\u003c\/p\u003e\n\u003cp\u003eThe specified maximum weight is 40kg The springs on this lifting bracket are particularly strong, making it suited to heavier outboard motors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eThermoplastic clamping pad\u003c\/li\u003e\n\u003cli\u003eFor outboard motors up to 40kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41357407551562,"sku":"SM-0820","price":245.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0820-4.jpg?v=1717512965"},{"product_id":"stainless-steel-deck-hinge-for-spray-hoods-canopies-etc","title":"Stainless Steel Deck Hinge For Spray Hoods \u0026 Canopies etc","description":"\u003cp\u003eStainless steel deck hinge, for spray hoods and canopies. This secures to the deck and acts as a hinge point for frames for boat hoods, boat canopies etc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Marine grade stainless \u003c\/li\u003e\n\u003cli\u003e90-degree angle\u003c\/li\u003e\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\u003cli\u003eFixing size M5 or 4.8mm for self-tappers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41361891819594,"sku":"SM-0443","price":10.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0443-01.jpg?v=1717591005"},{"product_id":"boat-deck-bollard-stainless-steel-316-polished-finish","title":"Boat Deck Bollard, Stainless Steel 316, Polished Finish","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBoat deck bollard in 316 stainless steel. This marine-grade stainless steel bollard with polished finish. For mooring rope or anchor attachment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 316 (marine-grade) stainless\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Solid cast steel construction\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Polished finish\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41369253773386,"sku":"SM-0431","price":43.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0431-1.jpg?v=1717775501"},{"product_id":"fender-hook-up-to-8mm-rope","title":"Fender Hook - Stainless Steel (Marine Grade) - Sprung Clip - For Up to 8mm Rope Size","description":"\u003cp\u003e\u003cspan\u003eFender hook made from 316-grade stainless steel, with sprung clip for security.  This fender hook is for rope sizes up to 8mm diameter.  Use these fender hooks as a convenient way to attach your fender lines, without fear of them jumping off and falling into the water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFender hooks are one way to have a quick and efficient way of putting your fenders in and out.  When out sailing it is advised to stow your fenders so that there is no chance of them escaping to the sea - there's enough plastic out there already!  Also consider using our \u003ca title=\"loop cleats for fenders\" href=\"\/products\/clam-cleat-cl223\"\u003eloop jam cleats\u003c\/a\u003e if you prefer to attach your fenders to your boat guard rails.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso use these hooks anywhere where you need a secure hook - the sprung clip will keep your bits and pieces in place even in a rough sea!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting holes in these fender hooks are 4.1mm in diameter.  Use our \u003ca title=\"stainless steel self-tapping screws\" href=\"\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\"\u003e3.5mm self-tapping screws\u003c\/a\u003e to secure them to your boat.  If your line size is larger than 8mm, take a look at our \u003ca href=\"\/products\/fender-hook-up-to-10mm-rope\"\u003elarger sprung fender hook\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFender hook - stainless steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSprung action for secure holding\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for lines up to 8mm in diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e316-grade stainless steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure with our 3.5mm self-tapping screws.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41387818713162,"sku":"SM-0226","price":4.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-0226-A.jpg?v=1718292874"},{"product_id":"fender-hook-up-to-10mm-rope","title":"Fender Hook - Stainless Steel (Marine Grade) - Sprung Clip - For Up to 10mm Rope Size","description":"\u003cp\u003e\u003cspan\u003eFender hook made from 316-grade stainless steel, with sprung clip for security.  This fender hook is for rope sizes up to 10mm diameter.  Use these fender hooks as a convenient way to attach your fender lines, without fear of them jumping off and falling into the water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFender hooks are one way to have a quick and efficient way of putting your fenders in and out.  When out sailing it is advised to stow your fenders so that there is no chance of them escaping to the sea - there's enough plastic out there already!  Also consider using our \u003ca title=\"loop cleats for fenders\" href=\"\/products\/clamcleat-cl234\"\u003eloop jam cleats\u003c\/a\u003e if you prefer to attach your fenders to your boat guard rails.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso use these hooks anywhere where you need a secure hook - the sprung clip will keep your bits and pieces in place even in a rough sea!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting holes in these fender hooks are 3.8mm in diameter.  Use our \u003ca href=\"\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\" title=\"stainless steel self-tapping screws\"\u003e3.5mm self-tapping screws\u003c\/a\u003e to secure them to your boat. We also have a slightly \u003ca href=\"\/products\/fender-hook-up-to-8mm-rope\"\u003esmaller sprung fender hook\u003c\/a\u003e for line sizes up to 8mm.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFender hook - stainless steel\u003c\/li\u003e\n\u003cli\u003eSprung action for secure holding\u003c\/li\u003e\n\u003cli\u003eSuitable for lines up to 10mm in diameter\u003c\/li\u003e\n\u003cli\u003e316-grade stainless steel\u003c\/li\u003e\n\u003cli\u003eSecure with our 3.5mm self-tapping screws.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41387847483466,"sku":"SM-0227","price":4.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-0227-A.jpg?v=1718293428"},{"product_id":"awning-hook-loop","title":"Fender Eye - 316 Stainless Steel - Attachment Eye Point For Boat Fenders - For Lines Up To 8mm","description":"\u003cp\u003e\u003cspan\u003eFender eye, made from 316-grade stainless steel, with a polished finish.  Use fender eyes as a secure attachment point for your fender lines.  The internal diameter of this stainless fender eye is 9.5mm in diameter, therefore we would recommend these for fender lines of 8mm diameter or less.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe fixing holes are 3.8mm diameter.  Use our \u003ca href=\"\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\" title=\"stainless self-tapping screws\"\u003e3.5mm self-tapping screws\u003c\/a\u003e to secure these in place.  These stainless steel eye attachment points can also be used as lacing eyes, or canopy mounting points.  Their smooth polished finish is attractive and the smooth internal loop surface is rope-friendly.\u003c\/p\u003e\n\u003cp\u003eAlternatively, we also have a \u003ca href=\"\/products\/fender-hook-up-to-8mm-rope\" title=\"sprung fender hook mount\"\u003esprung-hook fender mount\u003c\/a\u003e.  If you prefer to hang your fender lines from your boat guard rails, take a look at our \u003ca href=\"\/products\/clamcleat-cl234\" title=\"nylon loop cleat for attaching fenders\"\u003enylon loop cleat\u003c\/a\u003e.  Loop cleats are designed to make installation and height adjustment of your fenders even easier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel fender eye\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e316-grade stainless steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePolished finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFix with 3.5mm self-tapping screws\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41387912069194,"sku":"SM-0228","price":3.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-0228-A_9f0556b0-6084-46f9-ac0c-4fe8ce176264.jpg?v=1718293794"},{"product_id":"stainless-steel-flag-pole-mounting-holder-recessed-into-deck","title":"Stainless Steel Flag-Pole Mounting Holder, Recessed Into Deck","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eStainless steel flag pole mounting holder. This flag-pole bracket \/ socket is of the type which recesses into the deck. The flag-pole socket internal diameter is 32mm.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 316 Stainless steel construction\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 32mm internal diameter\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Polished finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Recessed design\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41387956437066,"sku":"SM-0536","price":31.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0536-1_1.jpg?v=1718294561"},{"product_id":"threaded-stainless-steel-bulkhead-mount-bracket-316-stainless-bulkhead-mount-bolt","title":"Threaded Stainless Steel Bulkhead Mount Bracket, 316 Stainless Bulkhead Mount Bolt","description":"\u003cp\u003eThreaded stainless steel bulkhead mount bracket with integrated threaded end, suitable for interfacing with turnbuckles or other female threaded fittings.  These 316 stainless steel bulkhead mounting brackets provide a means of attaching a threaded stud-end to a flat bulkhead. The bolt part of the assembly can pivot relative to the bracket.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003eMetric threaded mount\u003c\/li\u003e\n\u003cli\u003ePivoting mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"M5","offer_id":41388012798026,"sku":"SM-1275","price":6.69,"currency_code":"GBP","in_stock":true},{"title":"M6","offer_id":41388012830794,"sku":"SM-1276","price":6.43,"currency_code":"GBP","in_stock":true},{"title":"M8","offer_id":41388012863562,"sku":"SM-1277","price":7.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-1275-01.jpg?v=1718294874"},{"product_id":"316-stainless-steel-metric-stud-with-wood-screw-thread-terminal-connection","title":"316 Stainless Steel Metric Stud With Wood Screw Thread \/ Terminal Connection","description":"\u003cp\u003e316 Stainless steel metric stud with wood screw thread.  These studs are intended for screwing into wooden posts or hard-points to provide an anchorage for metric threaded fittings such as turnbuckles or eye nuts.\u003c\/p\u003e\n\u003cp\u003eThese stainless steel stud \/ wood screws have a ‘flat’ so that they can be wound or tightened into the wood with the aid of a spanner.  The wood post or hard-point should be pre-drilled before fitting these stainless screw studs – for best results test the most suitable diameter for the pre-drilled hole depending on the type of wood, using a scrap piece of material.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor screwing into wood\u003c\/li\u003e\n\u003cli\u003e316 stainless steel\u003c\/li\u003e\n\u003cli\u003eProvides a metric stud anchorage point\u003c\/li\u003e\n\u003cli\u003eCompatible with our metric turnbuckles\u003c\/li\u003e\n\u003cli\u003eChoice of sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"M5X80","offer_id":41389808943178,"sku":"SM-1280","price":2.93,"currency_code":"GBP","in_stock":false},{"title":"M6X90","offer_id":41389808975946,"sku":"SM-1281","price":2.88,"currency_code":"GBP","in_stock":true},{"title":"M8X130","offer_id":41389809008714,"sku":"SM-1282","price":5.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-1280-01.jpg?v=1718353699"},{"product_id":"deck-hinge-with-removable-pin-for-spray-hoods-canopies","title":"Deck Hinge With Removable Pin For Spray Hoods \u0026 Canopies","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDeck Hinge With Removable Pin For Spray Hoods \u0026amp; Canopies. This secures to the deck and acts as a hinge point for frames for boat hoods, boat canopies etc. The pin can easily be removed without the need for any tools.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 316 Marine grade stainless\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Removable pin\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 90-degree angle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Polished finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Fixing size M5 or 4.8mm for self-tappers\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41389903052874,"sku":"SM-0531","price":10.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0531-1.jpg?v=1718356192"},{"product_id":"universal-deck-hinge-for-spray-hoods-canopies","title":"Universal Deck Hinge For Spray Hoods \u0026 Canopies","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eUniversal Deck Hinge For Spray Hoods \u0026amp; Canopies. This secures to the deck and acts as a hinge point for frames for boat hoods, boat canopies etc. This hinge allows full articulation about two axes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 316 Marine grade stainless\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Universal articulation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Polished finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Fixing size M5 or 4.8mm for self-tappers\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41389914095690,"sku":"SM-0532","price":18.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0532-1.jpg?v=1718356505"},{"product_id":"diamond-pad-eye-mounting-hoop-a2-stainless-steel-mounting-pad","title":"Diamond Pad Eye Mounting Hoop, A2 Stainless Steel Mounting Pad","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDiamond pad eye mounting pad with hoop, manufactured in solid A2 stainless steel with a polished finish that will keep its appearance even when exposed to a harsh marine environment. With 4 countersunk fixing holes these stainless steel mounting pads provide a secure mounting for a range of applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• A2 Stainless Steel\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Loop Welded To Base\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"60x36","offer_id":41397687451722,"sku":"SM-0724","price":2.28,"currency_code":"GBP","in_stock":true},{"title":"65x40","offer_id":41397687484490,"sku":"SM-0725","price":3.15,"currency_code":"GBP","in_stock":true},{"title":"80x50","offer_id":41397687517258,"sku":"SM-0726","price":4.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/IMG_5741.jpg?v=1776266059"},{"product_id":"pad-eye-mounting-hoop-with-2-mounting-holes-a2-stainless-steel","title":"Pad Eye Mounting Hoop With 2 Mounting Holes A2 Stainless Steel","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePad eye mounting pad with hoop, manufactured in solid A2 stainless steel with a polished finish which will not degrade even when exposed to a harsh marine environment. These pad eyes come with two counter sunk fixing holes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• A2 Stainless Steel\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Loop Welded To Base\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"45x15","offer_id":41397692072010,"sku":"SM-0721","price":1.79,"currency_code":"GBP","in_stock":true},{"title":"60x20","offer_id":41397692104778,"sku":"SM-0722","price":2.67,"currency_code":"GBP","in_stock":true},{"title":"80x25","offer_id":41397692137546,"sku":"SM-0723","price":3.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/IMG_5747.jpg?v=1776265069"},{"product_id":"square-pad-eye-mounting-hoop-a2-stainless-steel-mounting-pad","title":"Square Pad Eye Mounting Hoop, A2 Stainless Steel Mounting Pad","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSquare pad eye mounting pad with hoop, manufactured in solid A2 stainless steel, with a polished finish which will not degrade even when exposed to a harsh marine environment.  With 4 countersunk fixing holes these stainless steel mounting pads provide a secure mounting for a range of applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• A2 Stainless Steel\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Loop Welded To Base\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"35x30","offer_id":41397694267466,"sku":"SM-0718","price":2.21,"currency_code":"GBP","in_stock":true},{"title":"40x35","offer_id":41397694300234,"sku":"SM-0719","price":2.62,"currency_code":"GBP","in_stock":true},{"title":"50x40","offer_id":41397694333002,"sku":"SM-0720","price":3.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/IMG_5743.jpg?v=1776265717"},{"product_id":"flag-pole-holder-stainless-steel-deck-bracket-for-flag-pole-mounting","title":"Flag pole holder, stainless steel deck bracket for flag-pole mounting","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFlag pole holder, stainless steel deck bracket for flag-pole mounting. The internal diameter of this flag-pole holder is 26mm, and a thumb screw is included for securing against the pole. Suitable for flag poles with 1” base diameter of 25mm base diameter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 316 polished stainless steel\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Thumb screw for securing flag pole\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 26mm internal diameter\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41404036513866,"sku":"SM-0542","price":49.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0541-1.jpg?v=1718786084"},{"product_id":"u-bolt-with-counter-plates","title":"U Bolts - 316-Grade Stainless Steel - M8 and M10 Sizes - Including 2 Load Plates","description":"\u003cp\u003e\u003cspan\u003eStainless steel U bolts, made from 316-grade marine stainless for the best corrosion resistance.    These come in 2 sizes, one with an M8 thread and one with an M10 thread.  Select a size from the drop-down to see the detailed dimensions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe gap between the legs of the M8 U-bolt is approximately 36mm, and for the M10 version the gap is 30mm.  Each U-bolt comes complete with nuts and 2 load-spreading plates.  The U-bolt can be clamped through a mounting surface with one plate above the surface and one plate below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStainless steel U bolts can be used as general purpose mounting points, or for boat rigging anchorages.  As alternative to our U-bolts, you might like to consider our \u003ca href=\"\/products\/square-pad-eye-mounting-hoop-a2-stainless-steel-mounting-pad\" title=\"stainless steel pad eyes\"\u003epad-eyes\u003c\/a\u003e, which come in a number of shape and size options.  If you are looking for a more compact mounting point, take a look at our \u003ca href=\"\/products\/long-eye-bolt-316-stainless-steel-marine-grade\" title=\"stainless steel long eye bolts\"\u003elong eye-bolts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316-grade stainless steel\u003c\/li\u003e\n\u003cli\u003eChoice of M8 and M10 metric sizes\u003c\/li\u003e\n\u003cli\u003eU-bolts with 2 load-spreading plates and nuts\u003c\/li\u003e\n\u003cli\u003eM8 has throat width of 36mm\u003c\/li\u003e\n\u003cli\u003eM10 has throat width of 30mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boat Fittings","offers":[{"title":"M8","offer_id":41405331669066,"sku":"SM-0231","price":9.96,"currency_code":"GBP","in_stock":true},{"title":"M10","offer_id":41405331701834,"sku":"SM-0232","price":13.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/IMG_5748.jpg?v=1776263740"},{"product_id":"dinghy-shroud-adjuster-316-stainless-steel-shroud-attachment-bracket-with-variable-length-adjustment","title":"Dinghy Shroud Adjuster, 316 Stainless Steel Shroud Attachment Bracket, With Variable Length Adjustment","description":"\u003cp\u003eDinghy rigging shroud adjusters, made from 316 stainless steel.  Dinghy shrouds lengths are tuned to adjust the amount of mast rake for optimum performance.  For different dinghy classes guidelines are available for the amount of mast rake (which can depend on the crew weight etc.) and these variable shroud adjusters provide a means of readily changing the amount of mast rake for best performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e316 Stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2 Size options of shroud adjuster available\u003c\/li\u003e\n\u003cli\u003eStrong simple to use design\u003c\/li\u003e\n\u003cli\u003eUK manufacture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Seasure","offers":[{"title":"Shroud Adjuster Large","offer_id":41406861279306,"sku":"SM-1092","price":27.28,"currency_code":"GBP","in_stock":true},{"title":"Shroud Adjuster Small","offer_id":41406861312074,"sku":"SM-1093","price":20.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-1093-1-2.jpg?v=1718895970"},{"product_id":"folding-mast-step-made-from-316-stainless-steel","title":"Folding mast step made from 316 stainless steel","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFolding mast step made from 316 stainless steel. Compact, elegant and robust folding step. These are useful in many places around the boat. Can be used for masts (as the name suggests) but also great for putting next to companion ways on speed boats to aid climbing up onto the fore-deck.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• Serrated non-slip step surface\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Robust design\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Spring action to keep folded away when not needed\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":41406904795210,"sku":"SM-0541","price":57.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/sm-0542-1.jpg?v=1718898462"},{"product_id":"square-pad-eye-mounting-hoop-a2-stainless-steel-mounting-pad-copy","title":"Foldable Pad Eyes - Available In Single Or Double - Polished Stainless Steel","description":"\u003cp\u003eIntroducing these neat stylish and polished stainless steel foldable pad eyes available in single or double.  Manufactured in stainless steel to ensure they retain their appearance and strength even when exposed to the harsh marine environment. They come with a rubber removable base to ensure a perfect fit and a smooth finger hole to assist in an easy lift of the eye.\u003cbr\u003e\u003cbr\u003eThe single folding pad eye comes with two fixing holes, whereas the double folding pad eye has four fixing holes.  A sleek curved style ensures a flawless addition to any deck.\u003c\/p\u003e\n\u003cp\u003e•    316-Grade stainless steel\u003cbr\u003e•    Single or Double versions available\u003cbr\u003e•    Suited to M6 thru bolts\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Single 70mm","offer_id":41558769303626,"sku":"SM-1730","price":36.12,"currency_code":"GBP","in_stock":true},{"title":"Double 100mm","offer_id":41558769336394,"sku":"SM-1731","price":53.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/IMG_3944.jpg?v=1724339847"},{"product_id":"table-shelf-mounting-support-bracket-easy-to-install-remove-a2-stainless-steel","title":"Table \/ Shelf Mounting Support Bracket – Easy To Install \u0026 Remove – A2 Stainless Steel","description":"\u003cp\u003eTwo piece table bracket manufactured in A2 stainless steel, a wall plate and table plate.  This bracket allows for easy attachment and removal of a table or shelf from a bulkhead. \u003cbr\u003e \u003cbr\u003eWe recommend that the opposite end of the table or shelf is also supported by a prop or equivalent, so these brackets provide an anchorage to the bulkhead, but should not be used in isolation for the support of heavy loads.\u003cbr\u003e\u003cbr\u003eThese plates come with drilled countersunk fixing holes.\u003c\/p\u003e\n\u003cp\u003e•    A2 Stainless Steel\u003cbr\u003e•    Two pieces – Wall plate and Table plate\u003cbr\u003e•    Requires additional prop (or equivalent) at opposite end of table \/ shelf\u003cbr\u003e•    Countersunk holes\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":55744089063799,"sku":"SM-1930","price":18.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1930.jpg?v=1757341417"},{"product_id":"t-bracket-316-stainless-steel-flat-shape-reinforcing-bracket-for-wooden-t-joints","title":"T-bracket – 316 Stainless Steel – Flat Shape – Reinforcing Bracket For Wooden T-Joints","description":"\u003cp\u003eStainless steel T-shape bracket with countersunk holes for securing into place.  Manufactured in 2mm stainless steel these T shape brace plates are ideal for use around the boat, they will retain their appearance even in a marine environment.\u003cbr\u003e\u003cbr\u003eAvailable in 3 sizes, 60mm, 80mm and 100mm. These plates are ideal for connecting T-joints in cabinets, or reinforcing shelving units and the like.\u003c\/p\u003e\n\u003cp\u003e•    Flat T-Shape\u003cbr\u003e•    316-grade stainless steel\u003cbr\u003e•    Countersunk holes\u003cbr\u003e•    Available in 3 sizes\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"60 x 15mm","offer_id":55744103907703,"sku":"SM-1927","price":3.7,"currency_code":"GBP","in_stock":true},{"title":"80 x 18mm","offer_id":55744103940471,"sku":"SM-1928","price":4.81,"currency_code":"GBP","in_stock":true},{"title":"100 x 18mm","offer_id":55744103973239,"sku":"SM-1929","price":6.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1927GRP1.jpg?v=1757342118"},{"product_id":"stainless-steel-eye-bolt-with-wood-thread-316-grade-compact-robust","title":"Eye Bolt With Wood Thread – 316-Grade Stainless Steel – Compact \u0026 Robust","description":"\u003cp\u003eThese A4 stainless steel eye bolts are very robust and solid, in a compact format ideal for decking wires and the like.\u003cbr\u003e\u003cbr\u003eThese eye bolts are intended for screwing into wooden posts or hard points to provide an anchorage point or thru guide for wires and wire ropes (or even rope lines).\u003cbr\u003e\u003cbr\u003eTo install these, drill a suitable pilot hole, then wind in the eye bolt with the use of a bar or screw-driver through the eye hole.\u003cbr\u003e\u003cbr\u003e•    A4 stainless steel\u003cbr\u003e•    Available in various sizes\u003cbr\u003e•    Wood thread\u003cbr\u003e•    Compact \u0026amp; robust form\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"6x40mm","offer_id":55804143141239,"sku":"SM-1917","price":1.91,"currency_code":"GBP","in_stock":true},{"title":"6x50mm","offer_id":55804143174007,"sku":"SM-1918","price":1.98,"currency_code":"GBP","in_stock":true},{"title":"6x60mm","offer_id":55804143206775,"sku":"SM-1919","price":1.93,"currency_code":"GBP","in_stock":true},{"title":"8x60mm","offer_id":55804143239543,"sku":"SM-1920","price":2.51,"currency_code":"GBP","in_stock":true},{"title":"8x80mm","offer_id":55804143272311,"sku":"SM-1921","price":2.65,"currency_code":"GBP","in_stock":true},{"title":"8x100mm","offer_id":55944515977591,"sku":"SM-1922","price":2.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1917-Grp2.jpg?v=1758292445"},{"product_id":"lockable-fishing-rod-storage-holder-316-grade-stainless-steel-with-nylon-inserts","title":"Lockable Fishing Rod Storage Holder – 316-Grade Stainless Steel With Nylon Inserts","description":"\u003cp\u003e2 part polished stainless steel fishing rod brackets suitable for horizontal or vertical installation. These brackets are suitable for fly rods, spinning or conventional.  Their compact size makes them ideal for tight spaces and ensures the rods are stored in an orderly manner and will keep them securely in place whilst at sea, or when left on the boat.\u003cbr\u003e\u003cbr\u003eManufactured in marine 316-grade stainless steel to ensure they retain their appearance even when exposed to a marine environment making them ideal for exterior use.  With easy access to the rod by simply rotating the nylon locking ring to remove the rod or secure in place.\u003c\/p\u003e\n\u003cp\u003e•    316-grade stainless steel with black nylon inserts\u003cbr\u003e•    Polished finish\u003cbr\u003e•    2 piece set\u003cbr\u003e•    Can be locked with a suitable padlock\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":55832830476663,"sku":"SM-1939","price":40.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1939-GRP2.jpg?v=1758728538"},{"product_id":"stainless-steel-180-degree-hinge-316-grade-stainless-hinge-with-polished-finish-71-x-40mm","title":"180 Degree Hinge – 71 x 40mm - 316 Grade Stainless Hinge With Polished Finish","description":"\u003cp\u003eA hinge that operates from fully closed, to 180-degrees open.  This hinge stops at 180-degrees open, for situations such as folding table flaps (light duty).\u003cbr\u003e\u003cbr\u003eThese hinges have a polished finish, and their marine-grade stainless steel makes them ideal for both interior and exterior use. \u003cbr\u003e\u003cbr\u003eThese hinges come with 4 countersunk fixing holes which are 7.2mm in diameter. Attach these hinges with \u003ca title=\"Set screw slot drive countersunk\" href=\"https:\/\/www.boatfittings.co.uk\/products\/raised-slot-countersunk-set-screws-stainless-steel-316-a4-marine-grade\"\u003eM6 set screws\u003c\/a\u003e (if using ‘nut and bolt’) or \u003ca title=\"Slot countersunk head self tapping screw\" href=\"https:\/\/www.boatfittings.co.uk\/products\/self-tapping-screws-slot-countersunk-csk-316-a4-stainless\"\u003e4.8 or 5.5 mm self tapping screws\u003c\/a\u003e. For a ‘classic’ look you might want to use our raised slot countersunk set screws.\u003cbr\u003e\u003cbr\u003eSee pictures for detailed dimensions of these hinges.\u003c\/p\u003e\n\u003cp\u003e•    180 degree hinge\u003cbr\u003e•    Polished 316 grade stainless steel\u003cbr\u003e•    40mm overall width\u003cbr\u003e•    71mm overall length\u003cbr\u003e•    2mm thickness\u003cbr\u003e•    Use M6 bolts\/set screws (nut and bolt fixing)\u003cbr\u003e•    Use 4.8 or 5.5mm self tapping screws into wood\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":55839053316471,"sku":"SM-1942","price":13.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1942.jpg?v=1758811240"},{"product_id":"fishing-rod-storage-holder-anodised-aluminium-with-white-nylon-inserts","title":"Fishing Rod Storage Holder – Anodised Aluminium With White Nylon Inserts","description":"\u003cp\u003eTwo-part aluminium fishing rod storage brackets suitable for horizontal or vertical installation. These brackets are suitable for fly rods, spinning or conventional.  Their compact size makes them ideal for tight spaces and ensures the rods are stored in an orderly manner and will keep them securely in place whilst at sea, or when left on the boat.\u003cbr\u003e\u003cbr\u003eManufactured in aluminium with an anodised finish to help ensure they retain their appearance even when exposed to a marine environment.  With easy access to the rod by simply rotating the white nylon locking ring to remove the rod or secure in place.\u003c\/p\u003e\n\u003cp\u003e•    Aluminium with white nylon inserts\u003cbr\u003e•    Silver anodised finish for resistance to the elements\u003cbr\u003e•    2 piece set\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":55876547674487,"sku":"SM-1938","price":22.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1938-GRP2.jpg?v=1759417784"},{"product_id":"stainless-steel-180-degree-hinge-316-grade-stainless-hinge-with-polished-finish-71-x-42mm","title":"180 Degree Hinge – 71 x 42mm - 316 Grade Stainless Hinge With Polished Finish","description":"\u003cp\u003eA hinge that operates from fully closed, to 180-degrees open.  This hinge stops at 180-degrees open, for situations such as folding table flaps (light duty).\u003cbr\u003e\u003cbr\u003eThese hinges have a polished finish, and their marine-grade stainless steel makes them ideal for both interior and exterior use. \u003cbr\u003e\u003cbr\u003eThese hinges come with 6 countersunk fixing holes which are 5.5mm in diameter. Attach these hinges with \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/stainless-steel-countersunk-socket-set-screws\" title=\"Countersunk screw\"\u003eM6 set screws\u003c\/a\u003e (if using ‘nut and bolt’) or \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\" title=\"Countersunk self tapping posi screw\"\u003e4.8 or 5.5 mm self tapping screws\u003c\/a\u003e. For a ‘classic’ look you might want to use our raised slot countersunk set screws.\u003cbr\u003eSee pictures for detailed dimensions of these hinges.\u003c\/p\u003e\n\u003cp\u003e•    180 degree hinge\u003cbr\u003e•    Polished 316 grade stainless steel\u003cbr\u003e•    42mm overall width\u003cbr\u003e•    71mm overall length\u003cbr\u003e•    2mm thickness\u003cbr\u003e•    Use M6 bolts\/set screws (nut and bolt fixing)\u003cbr\u003e•    Use 4.8 or 5.5mm self tapping screws into wood\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":55876613177719,"sku":"SM-1941","price":10.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1941-3.jpg?v=1759419512"},{"product_id":"90-degree-clamp-for-25mm-tubing-clamps-two-tubes-at-right-angles-with-u-bolts-nyloc-nuts","title":"90-Degree Clamp For 25mm Tubing – Clamps Two Tubes At Right-Angles – With U-Bolts \u0026 Nyloc Nuts","description":"\u003cp\u003eStainless steel clamp plates for holding two 25mm (or 1 inch) tubes at 90-degrees.  This is a robust clamping system – ideal for clamping accessories (such as life rafts) to your push-pit.\u003cbr\u003e\u003cbr\u003eMade in marine grade stainless steel this fitting will stand up to a harsh marine environment retaining its appearance.\u003cbr\u003e\u003cbr\u003eWhile the clamping parts themselves are very strong and robust be careful when clamping thin-wall tubing, not to squash the tube with these powerful clamps.\u003cbr\u003eSee pictures for detailed dimensions of these clamps.\u003c\/p\u003e\n\u003cp\u003e•    Clamp Plate for 25mm tube\u003cbr\u003e•    316 grade stainless steel\u003cbr\u003e•    Supplied with U-bolts and nylon lock nuts\u003cbr\u003e•    3mm plate thickness\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":56061665411447,"sku":"SM-1948","price":109.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1948.jpg?v=1761659168"},{"product_id":"a4-stainless-steel-fender-eye-3-point-fixing-polished-finish-17mm-hole-for-rope","title":"Fender Eye – 3 Point Fixing – A4 Stainless Steel Polished Finish – 17mm Hole For Rope","description":"\u003cp\u003eThis triangle shaped base fender eye is manufactured in polished A4 stainless steel to ensure that even when exposed to a harsh marine environment it will retain its appearance.  The internal diameter of this fender eye is 17mm, making these suitable for a wide range of line sizes.\u003cbr\u003e\u003cbr\u003eThe three countersunk fixing holes are 5mm in diameter.  Use \u003ca title=\"Countersunk self tapping posi drive stainless screw\" href=\"https:\/\/www.boatfittings.co.uk\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\"\u003eour 4.8mm self-tapping\u003c\/a\u003e screws to secure these in place. Their smooth polished finish is attractive and the smooth internal loop surface is rope-friendly. \u003cbr\u003e\u003cbr\u003eThe 3 fixing points and larger eye diameter make these fender mounting eyes suited to more demanding cases, giving a robust and reliable performance.\u003cbr\u003e\u003cbr\u003eAlternatively, we also have a sprung-hook fender mount.  If you prefer to hang your fender lines from your boat guard rails, take a look at our nylon loop cleat.  Loop cleats are designed to make installation and height adjustment of your fenders even easier.\u003c\/p\u003e\n\u003cp\u003e•    Polished marine-grade stainless steel\u003cbr\u003e•    Fender eye = 17mm diameter\u003cbr\u003e•    Triangle base\u003cbr\u003e•    Requires x3 4.8mm countersunk screws \u003cbr\u003e•    Robust design for more demanding cases\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":56294559252855,"sku":"SM-1972","price":12.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-1972-2.jpg?v=1764767902"},{"product_id":"flag-pole-mount-for-fitment-on-25mm-or-22mm-tube-fits-25mm-flag-pole","title":"Flag Pole Mount For Fitment On 25mm or 22mm Tube – Fits 25mm Flag Pole","description":"\u003cp\u003eA high quality marine grade 316 stainless steel hinged rail mount for a flag pole that requires attachment to 22mm or 25mm tube. Comes with a white rubber sleeve to ensure a snug fit for 22mm tube.  \u003cbr\u003e\u003cbr\u003eFlag pole mounting socket for attaching to your pushpit, this can mount to 22mm or 25mm tubing (a white rubber shim is used for 22mm tubing).  This flag pole mount exudes quality and is made from polished 316-grade stainless steel.  The flag pole is secured in place with the supplied thumb screw.\u003c\/p\u003e\n\u003cp\u003e•    Flag pole mount for your pushpit\u003cbr\u003e•    316 stainless steel (marine grade)\u003cbr\u003e•    Attaches to 22mm Or 25mm Tube Rail\u003cbr\u003e•    Fits 25mm flag pole\u003cbr\u003e•    Secure flag pole with thumb screw\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":56581662015863,"sku":"SM-2057","price":62.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2057-3.jpg?v=1769008708"},{"product_id":"osculati-heavy-duty-black-plastic-clips-sizes-to-fit-20mm-25mm-30mm-diameters","title":"Osculati Heavy Duty Black Plastic Clips – Sizes To Fit 20mm, 25mm \u0026 30mm diameters","description":"\u003cp\u003eThese clips are useful for keeping pipes in position (for example bilge pump tubing or engine cooling hoses).  They are also great for stowing boat hooks, flag poles, or other boat tools and implements secure in position for when you need them.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThese Osculati heavy duty black plastic clips come with 1 or 2 pre drilled holes in the base depending on the diameter to secure in place. For installation you will require either self-tapping screws or set-screws and nuts, depending on your installation plans. These clips will fit either 20mm, 25mm and 30mm tubing.\u003c\/p\u003e\n\u003cp\u003e•    Black plastic\u003cbr\u003e•    Choose from 3 sizes to suit your needs\u003cbr\u003e•    Secure with self-tapping screws or set-screws and nuts\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"20mm","offer_id":56793953829239,"sku":"SM-2093","price":2.47,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":56793953862007,"sku":"SM-2095","price":2.56,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":56793953894775,"sku":"SM-2094","price":2.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2093-94-95-GRP.jpg?v=1772028255"},{"product_id":"osculati-heavy-duty-black-plastic-pipe-clips-sizes-to-fit-35mm-or-40mm-diameters","title":"Osculati Heavy Duty Black Plastic Pipe Clips – Sizes To Fit 35mm Or 40mm Diameters","description":"\u003cp\u003eThese clips are useful for keeping pipes in position (for example bilge pump tubing or engine cooling hoses).  They are also great for stowing boat hooks, flag poles, or other boat tools and implements secure in position for when you need them.\u003cbr\u003e\u003cbr\u003eThese Osculati heavy duty black plastic clips come with 2 pre drilled holes in the base to secure in place. For installation you will require either self-tapping screws or set-screws and nuts, depending on your installation plans.  These clips will fit either 35mm or 40mm tubing.\u003c\/p\u003e\n\u003cp\u003e•    Black plastic\u003cbr\u003e•    Two sizes available\u003cbr\u003e•    Use \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/self-tapping-screws-posi-countersunk-316-a4-stainless\" title=\"Self tapping screws posi countersunk head stainless steel\"\u003e4.8mm self-tapping screws\u003c\/a\u003e or M5 set-screws and nuts\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"35mm","offer_id":56795321434487,"sku":"SM-2092","price":2.86,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":56795321467255,"sku":"SM-2091","price":2.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2091-92-GRP.jpg?v=1772033883"},{"product_id":"nylon-clamp-with-two-screws-and-nuts-to-suit-22mm-or-25mm-tube","title":"Nylon Clamp With Two Screws And Nuts To Suit 22mm Or 25mm Tube","description":"\u003cp\u003eA nylon clamp which comes with two screws and nuts and is sized to fit well with 22mm or 25mm diameter tubing.\u003cbr\u003e\u003cbr\u003eThis nylon clamp is ideal for attaching to pulpits or stanchions to use as a hooking point for plates, straps or elastics.\u003c\/p\u003e\n\u003cp\u003e•    White Nylon \u003cbr\u003e•    2 stainless steel screws and nuts (nuts are encapsulated)\u003cbr\u003e•    For 22mm or 25mm tubes\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":56924200829303,"sku":"SM-2098","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2098.jpg?v=1774279631"},{"product_id":"boat-transom-step-teak-stainless-steel-306-x-135mm-beautifully-finished","title":"Boat Transom Step - Teak \u0026 Stainless Steel - 306 x 135mm - Beautifully Finished","description":"\u003cp\u003eThis climb step is manufactured in 316 stainless steel and teak making it ideal for a marine environment.\u003cbr\u003e\u003cbr\u003eThis curved step comes with round 62mm diameter bases that are secured in place with 3x M6 set-screws.\u003cbr\u003e\u003cbr\u003eThe orientation of this step is 90-degrees.  If your transom is sloped and you would like some angled spacers please get in touch with us, as we can probably make some for you for relatively little cost.\u003c\/p\u003e\n\u003cp\u003e•    Stainless steel and teak\u003cbr\u003e•    Round bases 62mm diameter\u003cbr\u003e•    Require \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/hexagon-socket-head-cap-screws-to-din912-in-316-stainless-steel-metric-sizes\" title=\"Hexagon socket-head cap screws in 316 stainless steel\"\u003ex6 M6 set-screws\u003c\/a\u003e\u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/raised-slot-countersunk-set-screws-stainless-steel-316-a4-marine-grade?_pos=2\u0026amp;_sid=0c8ccf75e\u0026amp;_ss=r\" title=\"countersunk set screws stainless steel 316 A4\"\u003e\u003c\/a\u003e (with nuts and washers)\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":57056927646071,"sku":"SM-2141","price":33.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2141.jpg?v=1777475778"},{"product_id":"teak-flag-pole-three-sizes-with-25mm-diameter-base-section","title":"Teak Flag Pole – Three Sizes – With 25mm Diameter Base Section","description":"\u003cp\u003eThese are manufactured in teak and are available in three sizes.  600mm, 750mm and 900mm all with a 25mm shaped base to fit into a socket.\u003cbr\u003e\u003cbr\u003eThe flag pole comes with a ball top with a dimeter of 36mm.\u003cbr\u003e\u003cbr\u003eIf you prefer the traditional wooden flag-pole then why not use one of these lovely teak ones.  They have a plain (beautiful) teak finish, giving you the option to finish in your preferred method (none \/ teak oil \/ varnish \/ wax \/ \u003ca title=\"clear wood sealer\" href=\"https:\/\/www.boatfittings.co.uk\/products\/hydrosol-clearsealer-protect-woods-against-moisture-dirt-stains-500ml\"\u003esealer\u003c\/a\u003e).\u003cbr\u003e\u003cbr\u003eAs ensigns vary in size, there are no fixings built into these teak flag poles, giving you the option to use your preferred fittings at a geometry of your choice.  We have a number of options available for this, for example: \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/nylon-rope-cleat-light-weight-rope-cleat-made-from-uv-stabilised-nylon?_pos=1\u0026amp;_psq=nylon+cl\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"nylon cleats\"\u003enylon cleats\u003c\/a\u003e, stainless flag pole cleats, wire straps.\u003c\/p\u003e\n\u003cp\u003e•    Teak\u003cbr\u003e•    Available in 3 sizes\u003cbr\u003e•    Natural finish (to give you the choice)\u003cbr\u003e•    No flag-fittings included (to give you the choice)\u003cbr\u003e•    25mm diameter base section\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"600mm Long","offer_id":57059856482679,"sku":"SM-2142","price":38.33,"currency_code":"GBP","in_stock":true},{"title":"750mm Long","offer_id":57059856515447,"sku":"SM-2143","price":53.69,"currency_code":"GBP","in_stock":true},{"title":"900mm Long","offer_id":57059856548215,"sku":"SM-2144","price":90.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2142.jpg?v=1777557872"},{"product_id":"folding-table-bracket-with-quick-release-max-load-100kg-a2-stainless-steel","title":"Folding Table Bracket With Quick-Release – Max Load 100kg - A2 Stainless Steel","description":"\u003cp\u003eA2 stainless steel folding table bracket with leaver lock to ensure the table does not collapse.  This bracket can take a load up to a maximum of 100kg.\u003cbr\u003e\u003cbr\u003eThis bracket is a neat, compact and easy to use.  Ideal for tables, platforms or shelves that want to be folded against the bulkhead when not in use.\u003cbr\u003e\u003cbr\u003eUse these folding stainless steel table brackets in pairs for a sturdy solution in your boat cabin.  Can be used either way round, depending on the situation at hand.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eComes with 6 fixing holes on one side and 6 fixing holes on the other, see dimension image for full details.\u003cbr\u003e\u003cbr\u003e•    A2 Stainless Steel\u003cbr\u003e•    Max Load 100kg\u003cbr\u003e•    Sturdy design\u003cbr\u003e•    Quick-release operation\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":57146859192695,"sku":"SM-2150","price":46.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2150-3_-_Copy.jpg?v=1780492081"},{"product_id":"osculati-table-pedestal-set-anodised-aluminium-post-aluminium-base-top-fittings-with-easy-taper-fitment-700mm-height","title":"Osculati Table Pedestal Set – Anodised Aluminium Post – Aluminium Base \u0026 Top Fittings With Easy Taper Fitment – 700mm Height","description":"\u003cp\u003eAn Osculati table pedestal including top and bottom taper sockets, one to be fitted flush with the floor, the other to be mounted under the table top. \u003cbr\u003e\u003cbr\u003eBoth ends of the tube leg are tapered to fit with the end brackets.  This give a super-easy fitment of the leg and the table, taking only seconds.\u003cbr\u003e\u003cbr\u003eThe table tube leg is made of anodised aluminium and comes with two die cast aluminium bases for the top and bottom assembly.\u003cbr\u003e\u003cbr\u003eFitting the floor socket will need a central hole (approx. 62mm or larger) to accommodate the socket.  This leaves the rest of the floor socket nearly flush with the floor level, the flange thickness being around 5mm.\u003c\/p\u003e\n\u003cp\u003e•    Anodised aluminium pedestal\u003cbr\u003e•    1 Tube leg – 700mm in length\u003cbr\u003e•    1 base for attaching to underside of table\u003cbr\u003e•    1 base for flush mounting in floor\u003cbr\u003e•    Requires x12 \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/raised-slot-countersunk-set-screws-stainless-steel-316-a4-marine-grade?_pos=2\u0026amp;_sid=2fa4c8b92\u0026amp;_ss=r\" title=\"Countersunk set screws slot drive raised head marine grade\"\u003eM5 c\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/raised-slot-countersunk-set-screws-stainless-steel-316-a4-marine-grade?_pos=2\u0026amp;_sid=2fa4c8b92\u0026amp;_ss=r\" title=\"Countersunk set screws slot drive raised head marine grade\"\u003eountersunk set-screws\u003c\/a\u003e, \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/penny-washers-stainless-steel-a4-marine-grade-316-m3-m4-m5-m6-m8-m10-m12?_pos=4\u0026amp;_sid=b7bcf5d81\u0026amp;_ss=r\" title=\"Penny washer marine grade M5 stainless steel\"\u003ewashers \u003c\/a\u003eand \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/nyloc-nuts-stainless-steel-a4-marine-grade-316-m3-m4-m5-m6-m8-m10-m12?_pos=2\u0026amp;_psq=nuts\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Nyloc nuts M5 marine grade stainless steel A4\"\u003enuts\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":57177274253687,"sku":"SM-2085","price":47.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2085.jpg?v=1781527122"},{"product_id":"osculati-table-pedestal-set-polished-stainless-steel-post-aluminium-base-top-fittings-with-easy-taper-fitment-700mm-height","title":"Osculati Table Pedestal Set - Polished Stainless Steel Post – Aluminium Base \u0026 Top Fittings With Easy Taper Fitment – 700mm Height","description":"\u003cp\u003eAn Osculati table pedestal including top and bottom taper sockets, one to be fitted flush with the floor, the other to be mounted under the table top. \u003cbr\u003e\u003cbr\u003eBoth ends of the tube leg are tapered to fit with the end brackets.  This give a super-easy fitment of the leg and the table, taking only seconds.\u003cbr\u003e\u003cbr\u003eThe table tube leg is made of polished stainless steel and comes with two die cast aluminium bases for the top and bottom assembly.\u003cbr\u003e\u003cbr\u003eFitting the floor socket will need a central hole (approx. 62mm or larger) to accommodate the socket.  This leaves the rest of the floor socket nearly flush with the floor level, the flange thickness being around 5mm.\u003c\/p\u003e\n\u003cp\u003e•    Polished stainless steel pedestal\u003cbr\u003e•    1 Tube leg – 700mm in length\u003cbr\u003e•    1 base for attaching to underside of table\u003cbr\u003e•    1 base for flush mounting in floor\u003cbr\u003e•    Requires x12 \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/stainless-steel-countersunk-socket-set-screws?_pos=2\u0026amp;_sid=4a40bf99d\u0026amp;_ss=r\" title=\"Countersunk screws with hex drive head in A4 marine grade stainless steel metric thread\"\u003eM5mm countersunk set-screw\u003c\/a\u003es, \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/penny-washers-stainless-steel-a4-marine-grade-316-m3-m4-m5-m6-m8-m10-m12?_pos=4\u0026amp;_sid=b93ec1a54\u0026amp;_ss=r\" title=\"Penny washer marine grade stainless steel\"\u003ewashers \u003c\/a\u003eand \u003ca href=\"https:\/\/www.boatfittings.co.uk\/products\/nyloc-nuts-stainless-steel-a4-marine-grade-316-m3-m4-m5-m6-m8-m10-m12?_pos=2\u0026amp;_psq=nuts\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Nyloc nut A4 Stainless Steel marine grade\"\u003enuts\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Boat Fittings","offers":[{"title":"Default Title","offer_id":57177749553527,"sku":"SM-2149","price":87.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/5679\/9306\/files\/SM-2149.jpg?v=1781532835"}],"url":"https:\/\/www.boatfittings.co.uk\/collections\/brackets-mounts-holders.oembed?page=3","provider":"Boat Fittings","version":"1.0","type":"link"}